MED 2812 motor · for racing drones and FPV

Racing drones / FPV

MED 2812

The MED 2812 brushless motor is built for racing quadcopters and FPV flying. High power density and instant throttle response.

MED 2812 · Motorno electric motor for racing drones and FPV
Applications

What the MED 2812 was designed for

FPV racing

Hard acceleration and extreme manoeuvres

Cinematic FPV

Smooth passes for film and advertising

Freestyle

Punch and linear response for tricks

In service

Built to work where it has to

IP55
Ingress protection

Protected against dust and splashing water. Operates in rain and in dusty conditions.

1,200 h
Mean time between failures (MTBF)

Guaranteed service life under normal operation with regular maintenance.

-20°C…+60°C
Operating temperature

Stable performance in frost and in heat · for every climate zone.

Set-up

Recommended set-up with the MED 2812

A ready combination of motor + ESC + propeller + battery for maximum efficiency.

Motor
MED 2812 1900KV
ESC
50A BLHeli32
Propeller
5×4.3×3
Battery
6S 1500 mAh
Rec. take-off weight
0.65 kg (quad)

Specifications

Full technical specifications

Physical and materials

Dimensions (Ø×H) Ø28×12 mm
Weight 82 g
Configuration 12N14P
Bearings NMB (Japan)
Ingress protection IP55
Housing 7075-T6 aluminium (titanium shaft)
Magnets N52H, rated to 180 °C
Winding insulation 220 °C, AIW enamel

Electrical parameters

KV (options) 1700 / 1900 / 2300 / 2700
Max. power 850 W (10 s)
Rated power 500 W
Max. current 38 A
No-load current (10 V) 0.6 A
Internal resistance 42 mΩ
Max. thrust 1.8 kg (5×4.3 propeller)
Efficiency ≥85%

Bench testing

Load test data

Measured with a 5×4.3×3 propeller on a 6S battery. Thrust and current recorded during run-up.

Throttle Current (A) Speed (rpm) Thrust (g) Power (W) Efficiency (g/W) Temp.
40% 5.8 11 500 320 86 3.72 42°C
50% 9.4 14 200 510 139 3.67 50°C
60% 14.1 16 800 760 209 3.64 58°C
70% 19.8 19 400 1 040 293 3.55 65°C
80% 26.3 21 600 1 320 389 3.39 72°C
90% 32.7 23 200 1 580 484 3.27 80°C
100% 38 24 400 1 800 562 3.2 88°C

Measurements were taken on Motorno’s own test bench at an ambient temperature of +25 °C. Each throttle step was held for 30 seconds after stabilisation. The figures are given for reference and may vary with operating conditions.

Ready to order

Request a quote for the MED 2812

If the KV rating and specification suit you, send us a request · tell us the quantity and destination country and we will quote price and lead time.

Request a quote →

Need advice

Matched to your task

Tell us your aircraft parameters · our engineer will calculate the motor-propeller-battery set within 1-2 business days. Free of charge for OEM orders from 200 units.

Request a calculation →