MED 2810 motor · for light UAVs

Light UAVs

MED 2810

The MED 2810 brushless motor is designed for light quadcopters up to 1 kg all-up weight. High efficiency and low heating on long missions.

MED 2810 · Motorno electric motor for light UAVs
Applications

What the MED 2810 was designed for

Light quadcopters

Training and commercial drones up to 2 kg

Long FPV flights

For cinewhoop, cruising and aerial photography builds

Light inspection

Surveying power lines, roofs and small structures

In service

Built to work where it has to

IP54
Ingress protection

Protected against dust and splashing water. Operates in rain and in dusty conditions.

1,500 h
Mean time between failures (MTBF)

Guaranteed service life under normal operation with regular maintenance.

-25°C…+55°C
Operating temperature

Stable performance in frost and in heat · for every climate zone.

Set-up

Recommended set-up with the MED 2810

A ready combination of motor + ESC + propeller + battery for maximum efficiency.

Motor
MED 2810 1100KV
ESC
40A 4S
Propeller
9×4.5×3
Battery
4S 5000 mAh
Rec. take-off weight
1.8 kg (quad)

Specifications

Full technical specifications

Physical and materials

Dimensions (Ø×H) Ø28×10 mm
Weight 70 g
Configuration 12N14P
Bearings NMB (Japan)
Ingress protection IP54
Housing 6061-T6 aluminium
Magnets N52H, rated to 180 °C
Winding insulation 200 °C, UEW/AIW enamel

Electrical parameters

KV (options) 900 / 1100 / 1300
Max. power 1,000 W (60 s)
Rated power 600 W
Max. current 32 A
No-load current (10 V) 0.4 A
Internal resistance 85 mΩ
Max. thrust 1.5 kg (9×4.5 propeller)
Efficiency ≥87%

Bench testing

Load test data

Measured with a 9×4.5×3 propeller on a 4S battery. Thrust and current recorded during run-up.

Throttle Current (A) Speed (rpm) Thrust (g) Power (W) Efficiency (g/W) Temp.
40% 4.5 6 800 380 67 5.67 38°C
50% 7.8 8 400 520 116 4.48 45°C
60% 12.1 9 900 720 179 4.02 52°C
70% 17.4 11 200 920 257 3.58 60°C
80% 23.6 12 400 1 180 350 3.37 68°C
90% 28.2 13 100 1 340 417 3.21 75°C
100% 32 13 600 1 500 474 3.16 82°C

Measurements were taken on Motorno’s own test bench at an ambient temperature of +25 °C. Each throttle step was held for 30 seconds after stabilisation. The figures are given for reference and may vary with operating conditions.

Ready to order

Request a quote for the MED 2810

If the KV rating and specification suit you, send us a request · tell us the quantity and destination country and we will quote price and lead time.

Request a quote →

Need advice

Matched to your task

Tell us your aircraft parameters · our engineer will calculate the motor-propeller-battery set within 1-2 business days. Free of charge for OEM orders from 200 units.

Request a calculation →